How to Properly Maintain Your Furnace During the Winter

When the cold chill of winter arrives, your furnace is one of your home’s most essential appliances. It helps keep you warm on even the coldest winter night, which is why it is so important to make sure that it keeps working all season long. Proper maintenance can go a long way toward ensuring that your heater not only keeps running but also performs at maximum efficiency, helping save power well at the same time reducing your carbon footprint. Check out these helpful tips for maintaining your furnace.

Be Proactive

Life is busy. It is easy to put off furnace maintenance until the weather starts to change. Unfortunately, by the time temperatures plummet, it may be too late. The last thing you want is to find out that your furnace has a problem when it is freezing cold outside. Instead, start your maintenance early before temperatures start to fall. This will help ensure that your furnace is ready to go the minute it is needed.

Start with A Visual Inspection

A good place to begin is by carefully looking at your furnace. Make sure to check that the pipe that vents to the outdoors is properly attached to the furnace and positioned correctly. Check out any other tubes or attachments to make sure that they are safely out of the way. Additionally, if you have a gas furnace, check for the smell of rotten eggs. This can indicate that gas is leaking from the furnace, which is a potentially deadly issue that needs to be addressed immediately.Furnace

Check The Electrical Connections

Disconnect the power to your furnace. Then, take off the door and check all of the wiring to make sure that all of the connections are secure.

Clean Your Furnace

Any dust or dirt can interfere with proper furnace operation. Cleaning it before you start it up is the best way to avoid any problems. Using a soft brush, gently brush away any dirt inside the furnace itself. Use a vacuum cleaner to pick up any debris that you knock loose.

Inspect The Flame Sensor

If the flame sensor is not working the way that it should, it can keep the furnace from firing up. The sensor should be cleaned annually. The cleaning process is relatively easy. It just needs to be unscrewed and wiped down with an emery cloth. When you are done, simply put it back in place and put the door back on the furnace.

Call in a Professional Repair Company If Necessary

Furnaces can be complex and dangerous. Electric furnaces have a lot of voltage running to them while gas furnaces are connected to the gas supply. If you have any doubt about your ability to deal with either of these situations, you should contact a professional to maintain your furnace instead. Annual maintenance is surprisingly affordable – especially when you consider the peace of mind that comes along with knowing it was done correctly.